lateral connections

by chris.vonada@coe22.com » Wed Jul 08, 2015 12:39 pm

Hi,

I'm trying to reconfigure the org chart to allow assistants to be displayed laterally from their direct report. For example, on the attached screen shots, Traci is the admin assistant to Shawn and Carly is as well to JM. Is there a way to move each assistant up and next to their boss? Our org chart is very large horizontally and making this change would make it less so.

Thanks for your assistance,

Chris
Attachments
Screen Shot 2015-07-08 at 8.34.15 AM.png
Screen Shot 2015-07-08 at 8.34.15 AM.png (150.07 KiB) Viewed 2371 times
Screen Shot 2015-07-08 at 8.33.52 AM.png
Screen Shot 2015-07-08 at 8.33.52 AM.png (67.22 KiB) Viewed 2371 times
chris.vonada@coe22.com
 
Posts: 6
Joined: Thu Jul 02, 2015 8:29 pm

by Anton Khritonenkov » Fri Jul 10, 2015 8:15 pm

Hi Chris,

Currently you can display single assistant per manager only. If you use User Profiles as a data source, Org Chart uses "Assistant" property to find assistant for employee. Thus, this field has to be filled. If you use SharePoint list as a data source you have to specify mapping to field where information about assistant is stored. See the picture below:

Image

Once you configured it you can see assistant with lateral connection right under boss.

Image
User avatar
Anton Khritonenkov
 
Posts: 219
Joined: Wed Nov 12, 2014 1:33 pm

by chris.vonada@coe22.com » Mon Jul 13, 2015 3:56 pm

Thanks Anton, very helpful!!
chris.vonada@coe22.com
 
Posts: 6
Joined: Thu Jul 02, 2015 8:29 pm

by chris.vonada@coe22.com » Mon Jul 20, 2015 4:05 pm

Ah... I have another question related to this. So I have a profile for Shawn who's assistant was Traci, however Traci has been re-assigned. When I go into Sharepoint Profile for Shawn and a take out Traci, save and close it doesn't save the change it still lists Traci as the assistant? Any suggestions for this?

Thanks,

Chris
chris.vonada@coe22.com
 
Posts: 6
Joined: Thu Jul 02, 2015 8:29 pm

by Anton Khritonenkov » Wed Jul 22, 2015 7:39 pm

Hi Chris,

In your case Org Chart renders structure based on data from user profiles. If changes were not saved in user profile, it is an issue with Office 365 administration. You can contact Microsoft with this question.

Org Chart for Office 365 doesn't cache data. So, after page refresh it reads data from user profiles directly.
User avatar
Anton Khritonenkov
 
Posts: 219
Joined: Wed Nov 12, 2014 1:33 pm

by NathanObral » Tue Aug 15, 2017 3:15 pm

Bumping up this thread because I'm having issues invoking lateral connections for assistants. The org charts on my company's SharePoint website is pulling from the "user profile" option, and "assistants" are enabled. We don't need to use the dotted assistants.

What I'm trying to do is replicate the lateral connection for Brenda's profile under the Plumsail org chart list. In multiple attempts with the "Assistant" field (either with "Assistant", "David Navarro", "yes" or "1") the lateral connection fails to show up. See attached. Is there something that I'm missing with this setup?
Untitled1.png
Untitled1.png (54.67 KiB) Viewed 121 times

Untitled2.png
Untitled2.png (42.52 KiB) Viewed 121 times


Lastly, there is only one assistant that needs a lateral connection under my company's CEO. Her job title is supposed to be "Executive Assistant." Does the job title have to be "Assistant" in order for the lateral connection to work, or is "Executive Assistant" permissable?
User avatar
NathanObral
 
Posts: 1
Joined: Tue Aug 15, 2017 2:42 pm
Location: Avon, Ohio

by Anna » Mon Aug 21, 2017 2:33 pm

Hello Nathan,

Thank you for your question.

You have parobably already enabled assistants on “General settings” step of the configuration wizard.

The next step you should take is to set up to "Lookup" the type of information your "Assistant" column stores. As in the SharePoint UI, there is no built in method to change the "Get information from" property in the "Additional Column Settings" for your Lookup column I would recommend to create a new Lookup column from scratch and adjust it as shown below:

lookup.jpg
Lookup column settings
lookup.jpg (123.29 KiB) Viewed 92 times


Here you can see it in more detail if necessary.

Then, go to the manager item (David Navarro, in this case) and set an assistant there. Note, you don't need to set the assistent field in the Brenda item.

Then in the "Data sourse settings" tab set the Assistant ID mapping, choosing the name of the column you recently created.

It's possible that assistant of specific employee has the same employee as a manager. This creates duplicated boxes in the org chart.To avoid that you may either delete manager field value from the assistent item or hide this employee from subordinates following this guideline.

There are no restrictions on job title naming. Just remember to adjust the keyword according to it if you decide to set the filtration.

I hope this will be helpful.

Best regards
Anna Dorokhova
User avatar
Anna
 
Posts: 26
Joined: Mon Aug 14, 2017 6:55 am


Return to Org Chart for Office 365

cron